Описание AXV300
Линейка модульных преобразователей AXV300 это результат полученного опыта ф. Gefran за более 30-ти летний период работы в близком партнерстве с лидирующими индустриальными производителями автоматизации.
Включение каждой «мульти-переферийной» системы посредством «общей шины постоянного тока» гарантирует формулу чистой энергии, благодаря стандартному использованию технологий активного выпрямителя, которая в дальнейшем улучшает динамические характеристики и в то же время гарантирует энергоэффективность, восстанавливая энергосистему и предотвращая потерю энергии на тормозном резисторе.
Превосходный диапазон модульных регуляторов включает в себя широкий выбор комбинаций для систем до 120кВт. Серия предлагает 7 размеров с номинальным током от 5А до 200А для приводных модулей, а так же для рекуперативных модулей или модулей электроснабжения.
Реализация перспективной серии AXV300 базируется на позиционировании и подборке, структурированной в среде программирования по IEK 61131-3. Соединение через Ethernet или CANopen шину позволяет полную интеграцию в обычно используемую архитектуру с ПЛК.
Основные технические параметры AXV300:
- 3 x 400 VAC, 50/60 Hz
- Motor ratings from 2.7 kW (3.6 Hp) to 120 kW (160 Hp)
- IP20 protection rating
- Markings: CE
Основные характеристики:
all AXV300 modules need a 24 VDC supply voltage to power the regulation card/internal logic and fans.
AXV300 range of Axis Modules:
- motor control loop (brushless or asynchronous)
- current loop closing: 16 KHz (62.5 μsec)
- speed loop closing: 4 KHz (250 μsec)
- I2t overload: slow (150% In x 60 sec) and fast (200% In x 0.5 sec)
- management of local encoder for closing current/speed loops
- alarm management
- management of GStar communication from/to the AXV300-CU control module
AXV300-SM power supply module:
- DC-link output voltage: 565 VDC
- output power 11-22-44 Kw
- thermal overload and pre-alarm output for external PLC
- integrated braking unit
- indicator LEDs
- external pre-charge contactor output
- I2t overload
AXV300-SR + AXV300-AFE-SR Regenerative supply module:
AXV300-AFE-SR: regenerative supply control module
- indicator LEDs
- signal display
- external pre-charge contactor output
AXV300-SR: range of power modules for regenerative supply modules
- DC-link output voltage: 625 VDC
- used with the AXV300 AFE-SR control module it forms the system’s regenerative supply module
- I2t overload: slow (150% In x 60 sec) and fast (200% In x 0.5 sec)
AXV300-CU: Control Unit module:
- System initialisation
- System alarm management
- Software updates
- 2-way GSTAR optical fibre system for communication with axes (max 4x2 axes)
- Set-point calculation/transmission
- Reading of significant values
- MDPlc development environment
- Execution of application (e.g. Positioner, Electric Shaft ..)
- Fieldbus communication (CANopen port)
- Modbus RTU RS232 connection
- Programmed via PC using the GF_eXpress configurator
- Serial port for connection to auxiliary programming keypad (currently being developed)
- SD-card for storing configurations and downloading system data
- Standard I/O:
- 2 analog inputs -10 V…+10 V
- 1 analog output -10 V…+10 V @ 5 mA
- 4 opto-isolated digital inputs HTL 0…30 V
- 2 opto-isolated digital outputs 30 V @ 40 mA
- 1 opto-isolated digital output 30 V @ 500 mA
- Encoder management (with additional module):
- Digital encoder
- Sinusoidal encoder
- 5-track SinCos encoder
- 2-pole resolver
- Encoder with EN-DAT 2.1/EN-DAT 2.2 protocol
- Absolute encoder with SSI/BiSS protocol
- Control unit communication via high-speed fieldbus (with additional GD-Net, Ethercat, etc. module)
Функции:
- Two control modes for brushless and asynchronous motors (currently being developed)
- Current regulator autotuning
- I2t overload: slow (150% In x 60 sec) and fast (200% In x 0.5 sec)
- Operating modes:
- Torque and/or Speed (directly on axis module)
- Position: on CU module in MDPLC
- ELS, Electronic Line Shaft on CU module in MDPLC
- Fieldbus management: CANopen, Ethernet
- GSTAR optical fibre system for high-speed communication between CU and axis modules (max 4x2 axes)
- Programmed via PC using the GF_eXpress configurator
- MDPLC advanced development environment (according to IEC 61131-3)
Опции:
- CU module: version with encoder module (integrated)
- CU module: Version with Real Time Ethernet module (Integrated)
- CU module: I/O expansion (currently being developed)
- Dedicated EMC filters (compliant with European directive EN 61800-3)
- Braking resistor (standard for the entire range)
- Output choke (standard for the entire range)
- Input choke for conventional or regenerative supply module
- SD card for storing machine data
- RS232 serial line kit for connection to PC
- Optical fibre connection kit
- Standardised application SW programs in PLC mode
- Development tool for IEC 61131-3 environment: MDPlc